Jump to content
Excelsior Forums
Sign in to follow this  
Bluewolf

Selecting Jet Profile at Compile Time

Recommended Posts

Hi,

Is it possible to select the jet profile to use inside the project file?

We have a dedicated build server to build our projects. A recent project requires 1.5 while all the rest require 1.4 ( we can not upgrade these projects to 1.5 for these due to client requirements etc).

Cheers

Mark Hillary

Share this post


Link to post
Share on other sites

No, it is impossible.

However, jetsetup has batch mode, so you can switch profiles from scripts. To use the batch mode, please do the following (from console):

1) Go to jet/bin folder and execute the command "gui - jetsetup.exe"

2) Run "jetsetup -batch -show-profiles", remember the numbers of requied profiles.

3) Then, you may switch between the profiles by executing "jetsetup -batch -activate-profile <num>", where <num> is the number of the required profile, e.g. "jetsetup -batch -activate-profile 2"

You need to perform steps 1 and 2 only one time. Then, you may do step 3 from the scripts of your build server as many times as required.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×