Excelsior JET 4.1 Maintenance Pack 1 Download
NOTE: This Maintenance Pack has been superceded by Maintenance Pack 2, which is now the recommended download.
Excelsior JET 4.1 Maintenance Pack 1 (MP1) is an optional update that fixes multiple customer issues. It incorporates all hotfixes you may have received from Excelsior Technical Support prior to January 20, 2006.
WARNING: Maintenance Packs fix particular problems reported by Excelsior JET users and discovered by Excelsior test engineers after the release of the respective version of the product. They are tested on a representative subset of the test suite used during preparation of the original release. We therefore only recommend you to install Maintenance Packs in the following cases:
The most important issues resolved in Excelsior JET 4.1 Maintenance Pack 1 are as follows:
JET-2064, JET-2074: Excelsior JET itself and all but a few optimized applications do not work under Windows XP SP2 or Windows 2003 Server SP1 on AMD64/EM64T systems with hardware Data Execution Prevention (DEP) enabled.
JET-2075: EJB3 and JBoss 4.0.3 and up do not work due to a flaw in the implementation of annotations.
JET-2069: 32-bit color icons cannot be selected in JET Control Panel.
JET-1518: On some projects, Excelsior JET may hang for several minutes during compilation with CPU usage at 100% and the progress indicator at 0%.
If you are a registered customer of Excelsior JET 4.1 Standard or Professional Edition, but have not received a user/password combination for MP1 download, request it from our Support Dept. at firstname.lastname@example.org.
Depending on the platform and Excelsior JET Edition you are using, click one of the download links below:
MP1 installs on top of the original Excelsior JET 4.1, possibly with previous hotfixes applied. If you need to make a fresh installation, install Excelsior JET 4.1 first, cancel JET Setup, apply MP1, and then use JET Setup to create profiles.
To update an existing Excelsior JET installation, launch the downloaded executable and follow the on-line prompts. Upon successful copying of Maintenance Pack files, JET Setup will launch automatically and apply the Maintenance Pack.
Installation of MP1 obsoletes your current JET profiles, if any. You will have to refresh them before you may continue using Excelsior JET. Those profiles are backed up by JET Setup. If you rollback to the previous update level, they will be restored.
The procedure of profile refresh is as follows:
JET Setup is launched automatically upon successful installation of MP1. Select the profile that you want refreshed and click Refresh.
Run JET Setup to display the list of profiles:
- jetsetup -show-profiles
- Locate in the list the outdated profile(s) that you need to refresh and write down their numeric indexes.
For each profile index in your list, run JET Setup as follows:
- jetsetup -refresh-profile profile
where profile is the profile index.
To rollback to the previous update level, select Manage JET Updates in Excelsior JET Start Menu and click Undo.
Rollback does not remove the installed updates and associated profiles, so you can reapply MP1 later without installing it. Select Manage JET Updates and click Redo until it displays the current configuration as "jet-410-mp1".
Run JET Setup to display the list of installed updates:
- jetsetup -show-updates
Locate in the list the updates which you need to activate.
Then run JET Setup again as follows:
- jetsetup -activate-update list
where list is a colon-separated list of update names.
Display the list of profiles available for the new combination of updates:
- If necessary, create new profiles.