Excelsior Logo Home

Excelsior JET 7.6 Maintenance Pack 5 Download

NOTE: This Maintenance Pack has been superceded by Maintenance Pack 6, which is now the recommended download.

Regression Notice 03-Dec-2012:

After you apply MP5, projects using the Global Optimizer will fail to build. Make sure to also download and apply Hotfix 67.

Excelsior JET 7.6 Maintenance Pack 5 (MP5) is an optional update that fixes multiple customer issues. It supersedes Maintenance Pack 4 and incorporates all hotfixes you may have received from Excelsior Technical Support prior to November 14, 2012.

Excelsior JET 7.6 MP5 is a prerequisite for Java SE 6 Update 37 support.

WARNING: Maintenance Packs fix particular problems reported by Excelsior JET users and discovered by Excelsior test engineers after the release of the respective version of the product. They are tested on a representative subset of the test suite used during preparation of the original release. We therefore only recommend you to install Maintenance Packs in the following cases:

  • You have been advised to do so by an Excelsior support engineer;
  • You need to switch to a Java SE (micro)version supported through a Maintenance Pack;
  • You want to try a new technology from Excelsior that requires installation of a particular Maintenance Pack; or
  • You are experiencing a severe problem, such as compiler or application crash or incorrect application behavior.

Release Notes

MP5 is a prerequisite for Java SE 6 Update 37 support.

The most important issues resolved in Excelsior JET 7.6 Maintenance Pack 5 are as follows:

JET-6562: More efficient implementation of Thread.currentThread().isInterrupted()


None in this MP.


None in this MP.

Update 03-Dec-2012: There is a regression in MP5. A hotfix is already available.

Download Instructions

If you are a registered customer of Excelsior JET 7.6, but have not received a user/password combination for MP5 download, request it from our Support Dept. at support@excelsior-usa.com.

If you need only the fixes included in MP5, click one of the download links below:

Installation Instructions

MP5 installs on top of the original Excelsior JET 7.6, possibly with previous hotfixes applied. If you need to make a fresh installation, install Excelsior JET 7.6 first, cancel JET Setup, and apply MP5.

IMPORTANT: To get a Java SE 6 Update 29, 31, 33, or 34 profile working with MP5, first download and install the respective add-on, which includes the required Maintenance Pack and a prebuilt Java 6u29/31/33/34 profile. Then apply MP5 and refresh that profile (or create a new one if needed.)

To update an existing Excelsior JET installation, launch the downloaded executable and follow the on-line prompts. Upon successful copying of Maintenance Pack files, JET Setup will launch automatically and apply the Maintenance Pack.

Profile Management

Installation of MP5 does obsolete your current profiles. You will have to refresh them before you may continue using Excelsior JET. Those profiles are backed up by JET Setup. If you rollback to the previous update level, they will be restored.

The procedure of profile refresh is as follows:


JET Setup is launched automatically upon successful installation of MP5. Select the profile that you want refreshed and click Refresh.


  1. Run JET Setup to display the list of profiles:

    jetsetup -show-profiles
  2. Locate in the list the outdated profile(s) that you need to refresh and write down their numeric indexes.
  3. For each profile index in your list, run JET Setup as follows:

    jetsetup -refresh-profile profile

    where profile is the profile index.

Update Management


To rollback to the previous update level, select Manage JET Updates in Excelsior JET Start Menu and click Undo.

Rollback does not remove the installed updates and associated profiles, so you can reapply MP5 later without installing it. Select Manage JET Updates and click Redo until it displays the current configuration as "jet-760-mp5".


  1. Run JET Setup to display the list of installed updates:

    jetsetup -show-updates
  2. Locate in the list the updates which you need to activate. Then run JET Setup again as follows:

    jetsetup -activate-update list

    where list is a colon-separated list of update names.

  3. Display the list of profiles available for the new combination of updates:

    jetsetup -show-profiles
  4. If necessary, create new profiles.

Stay Tuned

To receive notifications about future updates:

Home | Company | Products | Services | Resources | Contact

Store | Downloads | Support | Forum | Blog | Sitemap

© 1999-2015 Excelsior LLC. All Rights Reserved.